If you are in a situation where you have a dead battery, you can always do a jumpstart for it to start. However, there are also some situations where jumpstarting your car does no good results.
Some people have reported that their car will not jumpstart, and they hear no clicking noise. As a driver, being aware of these kinds of situations is a must so that if it happens to you in the future, you will know exactly what to do.
There are many reasons why your car will not jumpstart, and there is no clicking noise. We will list them below, and you can check them by one to find the real problem with your vehicle.
If you want to know why your car won’t start and with no clicking noise, stay and keep reading. After this read, you will know exactly what to do and why a car that won’t jump and no clicking noise.
Table of Contents
Reasons Car Won’t Jump Start No Clicking Noise
If your car does not start, won’t jumpstart, and hears no clicking noise, there are many possible reasons for that. You need to check off these lists to eliminate the reasons for you to come up with the right cause why your car won’t jumpstart and you hear no clicking noise.
So without further ado, here are the possible reasons why your car will not start, and you hear no clicking noise.
You Might Have A Dead Battery
One reason for this is a dead battery. But a dead battery can be jump started. If you try to jumpstart your car and it won’t jumpstart, your battery can be dead.
When we say dead, it means your car battery might be damaged or completely dead. This might need to be replaced already because it will not hold a charge anymore.
You might check the electrical parts and wires, but it still would not do if you did check it multiple times if the issue is your car battery. This is the most common reason why your car will not jumpstart or have no clicking noise. You can have a damaged and completely dead battery that needs to be replaced already.
You Might Have A Faulty Spark Plugs
If your car doesn’t start clicking noise, there can be something wrong with your spark plugs. If there is no clicking noise, your car’s engine might not get enough sparks. You need a spark for the engine to start.
This is why it is essential to always check for the spark plugs and replace spark plugs as often as necessary. You can do this by yourself, but many people cannot handle the complicated procedure, so they leave it to the mechanic.
You Might Have A Blown Fuse Or Faulty Ignition Switch
If you have checked that your car battery is okay, you have to check if you had a blown fuse or a faulty ignition switch. You need to find the location of the fuse box. If you cannot find it, you can refer to the owner’s manual.
You need to locate the fuse box and check if there are any damages on the fuse or in the metal wire. If you see some wires loosened or completely disconnected, do what is necessary and disconnect or tighten the wires at their original price.
If you have a blown fuse, your starter relay will not get the power it needs to start the engine. If your fuse is working okay and is not damaged, you need to check the ignition switch. The ignition switch might not be working correctly.
You Might Have A Damaged Fuel Filter
You need to make sure that your fuel filter is not damaged. If your fuel filter is already damaged, your fuel filter must be changed already. If you have a damaged or blocked fuel filter, the gas will not reach the engine.
You Might Have An Empty Gas Tank
This can be a primary and apparent reason that people tend to mislook. Your car might not start, and you cannot hear a clicking noise because your gas tank is empty.
The fuel gauge can also be wrong sometimes, so you need to double-check. It is also possible that due to the icy weather, your fuel line can freeze.
You Might Have A Faulty Starter
Your car might not start, and you will not hear any clicking noise if you have a faulty starter. Your car starter is the one responsible for cranking your engine so that it can start. Your starter might not get the right amount of electricity.
You can try to jumpstart your car, but it cannot guarantee that your car will start again. You can check this using your owner’s manual. You also need a voltmeter.
You Might Have An Impaired Or Damaged Ignition
Like the starter, your ignition can prevent your car from starting if it is broken or damaged. The starter or ignition can be the problem if you can turn your headlights on, but your car will not crank. If your ignition is broken or damaged, you can jump your starter engine by a charged battery.
Here are just some of the reasons why your car will not jumpstart and you hear no clicking noise. You can check it one by one until you get to the real issue with your vehicle.
What to Do When a Car Won’t Jump Start and No Clicking Noise?
If your car does not jumpstart and hear no clicking noise, there can be many possible reasons for that. You can have possible problems with your alternator, your wire connections, battery, battery terminals, and many more. Here are some steps to do if your car will not start and hear no clicking noise.
1. Try To Jump Start Your Car Once Again
You can try to jumpstart the car again. If you tried again to jumpstart the car and start but dies again after a few seconds or in a minute, you could have an issue with your alternator. However, if your car starts, you need to drive it around for a couple of minutes to charge the battery.
Even a dead battery can still be jump started so that the engine will start. If it does not start, there might be some other damages that need to be fixed first, like a damaged battery or an alternator.
2. Inspect The Battery Cables And The Wirings
If the first gave no result, you could inspect the battery cables and the wirings instead. For the wires, you need to check if all the wires are in good condition and they have no damages to them. You need to check also if they are in their proper positions.
This is why it is essential always to check the battery cables and the wirings to not come to the point of your car breaking down just because of some loosened wirings and corroded battery cables.
3. Check The Connections Of The Battery Cable
You need to check for the connections of your battery cable. Check if all of them are correctly placed, and they are not loosened and have no damage.
If the battery cables are damaged and rusted, you can try and clean them. If it is loose, tighten it and if there are any other damages, replace it.
In summary, if your car will not jumpstart and no clicking noise, there are many possible reasons for that. The list above will be able to help you identify the cause of it.
There is also a step in what to do if you find yourself in this situation. You need to remember to do all the double-checking that you can do to avoid any further problems.
- How Long to Recharge Car Battery After Jump?
- Can You Jumpstart a Car With a Bad Starter?
- Can You Jumpstart a Car With a Bad Alternator?
- Can a Car Battery Be Too Dead to Jump Start?
Image credits – Canva