People have been wondering how to fix a hyper flash without a resistor. To start, let us first define what hyper flash is. The hyper flash is mainly linked with a problem when you have LED lights for your blinkers.
Now, these blinkers are very bright. They also do their job of catching the attention of some other drivers as well. However, time will come when they will be a victim of a hyper flashing issue.
This hyper flashing usually is observed when blinkers are flashing for about one hundred five (105) to one hundred fifteen (115) times in a minute. Now, this will cause problems and issues with the other drivers. This can also be dangerous.
Especially at night, the blinkers are very important and now, this hyper flash issue must be resolved. With that, we will be talking about how to fix hyper flash without a resistor. Let us get started.
Table of Contents
Can You Fix Hyper Flash Without Resistor?
Yes, you can fix hyper flash even without a resistor. We will talk about it in the next section. An aftermarket causes a hyper flashing led turn signal.
The LEDs will take a lesser current than the regular bulbs. With that, the vehicle’s control module will think that there is a bulb outage. The standard solution is installing a resistor, but you can still fix it without.
How Do You Fix Hyper Flash Without Resistor?
If your blinkers are showing signs of hyper flash, do not worry. Here are two things that you can do to fix your hyper flashing issue.
1. You Can Use A Thermal Flasher Relay
You will come with a relay that is coordinating with the flashing speed of your turn signals. This becomes the direct root where your hyper flashing issue begins. This factory flasher relay is usually made so that it can operate with the regular bulb.
This will be pretty tricky because the hyper flashing problem will begin from the led lights. So you have to fix this with an aftermarket thermal flasher relay, and it is designed to function with an aftermarket led replacement bulb.
However, if your vehicle is a new model, this solution might not suit you because the new vehicles do not have a flasher relay, so there will be no coordination with the led corner lights. These new vehicles will have their electronic control unit or ECU instead to communicate with the flashers.
2. You Need To Replace Your Electronic Flasher
You must check first if your car has a replaceable electronic flasher. You can check this yourself. You can start by turning your hazard switch on. You will hear a clicking sound that will come from your dashboard.
If there’s no clicking sound, then the odds are not in your favor. This means that your vehicle might not have a replaceable flasher unit. The second might come from a small speaker.
This small speaker is located in the instrument cluster. Your computer controls this. You might also find it in the hazard switch.
Is Hyper Flash Illegal?
The department of transportation requires that all vehicles have their turn signals flashing at just a minimum of one hundred twenty (120) times in a minute. So if you are having an issue with hyper flashing, you can already be breaking the law. However, there are times that the manufacturers will make a headlight, and they are intended to hyper flash.
In this case, it is legal, but it will be difficult for some drivers. So if you think your vehicle is hyper flashing, make sure that you are not blinking more than one hundred (120) times.
In summary, hyper flash can be annoying to some drivers. It can also be dangerous to some drivers on the road. The hyper flash issue can be fixed.
You have to follow the guide above. However, it is also illegal, and you could be breaking the law with your blinker’s hyper flashing. With that, it is essential to have it fixed as soon as you can.
- Bubbles On Dipstick
- Do You Have To Turn Your Car Off When Getting Gas?
- How Long Does It Take For A Car To Cool Down?
Image credits – Canva