A coolant is a product that is in the cooling system of every vehicle. Most of the brand of a coolant is made up of Ethylene glycol or EG. But some of the brands are using propylene glycol or PG.
So which among the 70/30 coolant and the 50/50 coolant is better to use? The 70/30 is that the antifreeze or the water will boil higher than the standard two hundred twelve Fahrenheit. A 70/30 mix will then lower the freezing point to negative sixty-seven degrees Fahrenheit and raise it to boiling temperature to two hundred thirty-five degrees Fahrenheit; a 70/30 mixture of coolant and water is not as efficient in conducting heat as a 50/50 mixture.
This is because it is less toxic if it is ingested. The antifreeze is a mix in equal parts with water to create a coolant solution, and it provides both freezing and boilover protection compared to purified water. Water is a good conductor of heat.
It is suitable for cooling the engine and transferring its heat to the radiator and heater core. But purified water freezes at thirty-two (32) degrees Fahrenheit and boils at two hundred twelve (212) degrees Fahrenheit, and it is not adequate for year-round driving or a hot running engine.
So many car drivers have been asking what is better to use, 70/30 or 50/50 coolant. In this article, let us talk about this matter. Let us start.
Table of Contents
What Is The Difference Between 70/30 And 50/50 Coolant?
If mixed with equal parts with water (50/50), the antifreeze will lower the freezing point to a negative thirty-five degrees Fahrenheit. It will also raise the boiling temperature to two hundred twenty-three degrees Fahrenheit. The antifreeze also has corrosion inhibitors to protect the engine and the cooling system and prevent rusting and corrosion.
The additive package in the most long-life coolant can last up to five years and one hundred fifty miles. Coolant is not forever, but it can be longer to lower the need for a constant coolant change. A 50/50 mixture of a coolant and water is the standard recommendation for most of the applications.
It provides the best all-around cooling protection and performance for most applications. A premixed antifreeze is 50/50, and it takes the work of correctly mixing water and antifreeze. In some situations, the ratio of antifreeze increased by as much as seventy percent.
A 70/30 mix will then lower the freezing point to negative sixty-seven degrees Fahrenheit and raise it to boiling temperature to two hundred thirty-five degrees Fahrenheit. A 70/30 mixture of coolant and water is not as efficient in conducting heat as a 50/50 mixture.
This is because the thermal capacity of antifreeze is not as high as the water. This can make the engine run too hot and overheat if the radiator’s cooling capacity is marginal.
Related: 60/40 Vs 50/50 Coolant
Which Coolant Is Better, 70/30 Or 50/50?
The coolant or antifreeze will raise the boiling as far as the 70/30 mixture being on the maximum beneficial mixture. It will also lower the freezing point. It will usually be printed as a table on the back of any container.
The 70/30 is that the antifreeze or the water will boil higher than the standard two hundred twelve Fahrenheit. It will also freeze below the normal thirty-two Fahrenheit because of the physical properties of the mixture. If your solution is above seventy percent, the boiling point will start to fall back down.
The freezing point will also start to go back up, and it is based on the properties of more pure ethylene glycol. So you need to use a mix that would range between 50/50 and 70/30, and the 70/30 is the best and the maximum.
When Should You Use 50/50 Antifreeze?
If you buy an antifreeze, it will require car drivers to mix it with water and be a little more involved. But it will give you more flexibility if it comes to the mixture. So, in general, a 50/50 mixture of water and antifreeze can be a good place to start. But speaking of climate, you should consider the temperature.
Your 50/50 will work best in moderate climates if the temperature gets below thirty-two on occasion. However, in climates where the temperature will drop below thirty-two degrees Fahrenheit for a long time, the mixture will be close to seventy percent coolant and then thirty percent water because it is more suitable to keep coolant from freezing.
When Should You Use 70/30 Antifreeze?
You should mix an ethylene glycol coolant with water in a 70/30 ratio, in other words. In other words, it is seventy percent coolant and thirty percent water. This is more suitable and recommended if you are in an environment with very harsh winter conditions.
In summary, coolant is essential to the health of the vehicle. However, a lot of car drivers also have confusion in terms of the mixture.
So it is essential to provide clarity with the mixture of coolant. Use this as your reference so that you will have guidance.
- Lots Of Water Coming Out Of Exhaust
- Accidentally Overfilled Gas Tank
- Coolant And Antifreeze Freezing Point
- Coolant And Antifreeze Boiling Point
Image credits – Canva