Road Noise And Vibration After Tire Rotation: Why Is That?

Have you ever experienced that your tires are making this new and weird noise after you have it rotated? Some people have been reported to notice this road noise and vibrations after they have rotated their tires. You might also notice that this sound is somehow aligned with your speed. 

One essential thing is not to take this road noise and vibration as if it was nothing. It will become a big problem if you have this ignored. Never think that this road noise is just nothing and that you should ignore it until they go away. 

If this road noise gets ignored, then it can lead to a whole new problem. This is an unusual situation; many car drivers do not know what to do when this happens. For enlightenment, let us talk about the reasons why there is road noise and vibration after your tire rotation. 

We will also be talking about what are the steps that you can do to fix this issue. So without further ado, let us start.

Road Noise And Vibration After Tire Rotation

Can Rotating Your Tires Cause Noise And Vibration?

No, rotating your tires does not always cause noise and vibration. What happens here is that you have encountered a problem with the tire rotation, or there could be something wrong with the tire rotation. Also, if you have not changed your tires for a while, you may experience noise and vibration after the deed. 

You also have to note a specific pattern for your tires if they are getting worn out. You can rotate your tires in an x pattern if your tires are nontraditional. When we say that an X pattern, you can swap the tires front to back, or you can switch them on opposite sides. 

If you have directional tires and can only be rotated from front to back or vice versa, you can experience noise and vibration. Those tires that are directional have patterns that are destined to rotate in just one direction. If your tires are rotated in the shop, their way of rotating might have affected its behavior. 

It will be best if you take note of this. So if you take your vehicle to a shop and let them do the rotating for you, you must always ask about what kind of method or process they do it. If they say that they do it using the cross method, it will depend on you to change it doing the front to the rear rotation. 

If your wheel is also tightened too much during the last lug, this can also cause why your tire is making noise or vibration after the tire rotation. If you have your tires in one position over a long period, you can experience some malfunction. This can be because of a misalignment of your tires. 

This is why you are experiencing some weird noise, and you also have this weird vibration. So with that, you should know that the position of your car in the rear part and the front is essential. This can be the reason why there is so much noise after your tire rotation. 

So you must make sure that your tires are balanced with each other. You must also check if there are wear and tear in your tires. This can also be the reason why there is noise after your tire rotation. 

You should check where the wear is. These can be the potential reasons. Tire rotation does not create noise and vibration itself but problems along the way.

Why Does Tire Rotation Cause Noise And Vibration?

If there is noise and vibration after your tire rotation, there are a few reasons it happens. We will list below some of the possible reasons for noise and vibration after your tire rotation.

1. Your Wheel Might Be Tightened Too Much

Your wheel might have tightened way too much when you did the last lug. You should remember never to tighten your car tire so much. You can always use a torque wrench to ensure that you can make sure that every part is secure so it will not fall.

2. There Could Be A Problem With The Alignment

This is also another possible reason if there is noise and vibration after your car rotation. If your tires have been in one position for a long time, some malfunction and faults can be. If your vehicle still is not settled for a wheel alignment, you will experience a bumpy ride.

3. You May Have Old And Ragged Tires

It can also be that your tires are old. It is essential to change your tires once in a while. It will make some noise and vibration, and so in order to fix this, you have to replace your old tires with new one.

4. You May Have A Bad Wheel Bearing

If you are having a bad wheel bearing, it can cause tire noise and vibration. If the wheel bearing is already deteriorating and already damaged, it can cause weird noises and vibrations.

How To Fix Noise And Vibration After Tire Rotation?

If you have noise and vibration after tire rotation, it can be frustrating. But do not worry, you can do some rectification with these problems. First, you have to buy a new tire and then replace your old tire. 

You can choose those tires that are non-directional so that they can be rotated fully. This will make it easier for you so that you will have no problem developing it again. So if you want to fix this noise and vibration issue, it is essential to have a rotation schedule and stick with it.  

Your tires must be rotated every six months, or you can try six thousand miles to eight thousand miles. You may have a poor alignment. If your vehicle were not aligned properly, the vehicle’s weight would not be distributed evenly in all four tires. 

With this, there will be more noise. Accidents can distort the car alignment. But there are some other factors as well. 

So if your vehicle has hit something or has been on a bumpy road, there can be problems with the alignment. This should be a part of your regular maintenance checking.

Is It Normal For New Tires To Vibrate?

No, it is normal. However, it is normal to have some issues during the tire rotation. And this is the reason why there is vibration and noise after the tire rotation.


In summary, some car drivers have been indeed experiencing tire noise and vibration after they have their tire rotation. This is not usual, but it happens. There are some possible reasons why this happens. 

You have to do some checking. What is good about this problem is that it can be easily fixed. But, again, you have to find out what the reason is.

Also Read:


Image credits – Canva

Share on:

My name is Hank, and I've been in the automotive industry for 27 years. I've been working in my own auto repair shop for the last 13 years, and now I want to help you here, on my blog. Let me know if you have any questions. Read more