How To Make Your Car Shoot Flames? (Step-By-Step Guide)

Many people are asking if their vehicle can shoot flames. These people are so curious that they want to know how to make their vehicle shoot flames. With that, we have made this article to address this issue. 

So how to make your car shoot flames? You just have to use old cars, and then look for leaks. Turn your engine on and then turn it off and then accelerate. 

In any film, you will usually see vehicles that would shoot into flames. And maybe this is the reason why a lot of people also want to learn if they can shoot their car in flames. This is an article for people who are asking the same thing. 

Car shooting in flames is dangerous and it is not safe, but there are still people who still want to know a lot about how to shoot their vehicle flames. It may be over the top in the movies where vehicles would burst into flames and they would explode but it is possible. This article will tell you how to shoot a car in flames. 

If you ask the same question, this article is suited for you. So keep reading to know more. Let us get started. 

How To Make Your Car Shoot Flames

Can Any Car Shoot Flames?

In a combustion engine, the oxygen in the vaporized fuel will be mixed, igniting. The explosion is contained, and it will compel the engine to do some rotation. With that, the wheels will be spinning. 

However, it is not all the fuel that will get burned. If the fuel travels to the hot exhaust pipes, it will get the chance to reach the oxygen outside. With that, it will ignite if it comes out of the tailpipe. 

In a standard front-engine passenger vehicle, it does not often happen. These engines are low-powered and small; they will need much less fuel to operate. They also have an exhaust system that is more extensive for the fuel to flow into the tailpipe. 

This will make it harder for them to get hot enough. The exhaust also has catalytic converters, the devices that will clean up the pollutants like excess fuel vapor will make it for cleaner emissions. 

How To Make Your Car Shoot Flames?

If you want to make your car shoot flames, you can find your guide in this section. 

1. Use An Old Car

The first thing to do is that you have to use an oil vehicle. You have to use an old vehicle so that you can make the old car backfire effortless. The new and modern vehicles have this system, and it is helping the prevention of the flames. 

So if you use an old vehicle, you will not exert much effort to reach your goal. So an old vehicle will spit fire more quickly than the new one. It can be dangerous. 

You have to be careful. Another reason you have to use an old vehicle is that if anything happens to the vehicle, it will not hurt your wallet so much. 

2. Check For Leaks

Before you do the actual activity, you have to check for any leaks. Next, you have to check if there are any drips. 

You need to have this repaired first before doing the activity. Any drips or leaks can cause a fire in the vehicle. 

3. Turn Your Engine On

If you are done checking for all the leaks and drips, you can proceed to the next step. The next step is to turn on your engine. After turning your engine on, give it some gas blood. 

4. Turn The Engine Off

After turning on your engine and giving it some gas blood, you can proceed to the next step. The next step is to turn your engine off. 

However, after turning the engine off, do not take your foot off the pedal. You have to maintain a light pressure. Hold it for a few seconds. 

5. Accelerate

After holding it for seconds, you have to start the vehicle again. If your vehicle is already running, you can now floor the acceleration. This will then make some flames, and it will shoot out of your exhaust. 

How To Make Your Car Shoot With A Spark Plug?

Making your vehicle shoot flames using a spark plug is a simple way. Unfortunately, it is also a rough way to make your vehicle shoot some flames. However, this method works. 

First, you have to connect the spark plugs for about five inches from the end of your exhaust. After, run the wire to the driver. After that, make up a switch so that you can ignite the spark. 

Then, on the other end, connect the wire from the switch, and it should connect to the positive terminal for your car battery. This method is fun but be careful when you are doing it. You can have a very high flame, and it can be dangerous.

How To Make Your Car Shoot Blue Flames?

The sole reason why your vehicle is shooting blue flames is that there might be an unburnt fuel that has been dumped into the exhaust system, and it might have caught on fire. So the most common way to remove the fire is to remove your catalytic converter. Its job is to clean up the stuff like fuel to exit your vehicle. 

This is good for the environment. The next step you should do is to dump the fuel into the exhaust. You can accelerate hard and with a wide-open throttle. 

After, take your foot off the accelerator and then hastily snap the throttle shut. The fuel and the air that has not been dumped into the combustion chamber are not needed for propulsion. 

Is It Safe When Your Car Shoots Flames?

No. The liquid fuel is not supposed to flow into the exhaust pipes. This is why the exhaust valve closes if the fuel is sprayed into the ignition chamber. 

It does also if only the exhaust fumes remain. The first to wear out is the exhaust valve. It can get burned with an excessive spitfire. 

If the valves do not close if the fuel is ignited in the chamber, it can lack engine compression. The performance of your vehicle can decrease. The engine will not operate properly.

Is It Ok For The Car To Shoot Flames?

No, it is not okay. For starters, it is not part of the feature of the vehicles to spit and shoot some fire. Therefore, spitting and shooting flames is not normal. 

Summary

In summary, a lot of people are curious if their vehicles can shoot flames. The answer is yes. Your vehicle can shoot flames. 

You can also make your vehicle shoot flames. The guides are written above and used as a guide.

Also Read:

Resources

Image credits – Canva

Share on:

My name is Hank, and I've been in the automotive industry for 27 years. I've been working in my own auto repair shop for the last 13 years, and now I want to help you here, on my blog. Let me know if you have any questions. Read more